After a bit of a hiatus(!), I’m now finding a bit of time to get back on with the work. The first thing to be done was to carry on with the offside wing and wheel arch. When I left it before, the only bits that still had the old underseal that needed removing were […]
OK. I know. There’s been no posts from me now for over a year. How embarrassing. There has been a reason, though: I’ve moved house. It was a fairly spur of the moment thing that we decided on in March last year (although we’d been thinking about it for a while), and we actually made
Now I’ve moved the work inside, I’ve started work on a couple of different bits. The first parts to get my attention were the headlamp lift motors and the wiper motor. The wiper motor is waiting on a couple of parts, but I’ve got one of the headlamp motor assemblies done now (I decided to
As you might have noticed, I haven’t updated here for a little while. As tends to happen, other plans and projects mean that I just haven’t been able to get down to the car recently. As it’s now starting to get colder and the days are getting shorter, I’ve decided it’s time to pack up
The body panels I ordered arrived today. I have now spent more on replacement body panels alone than I bought the car for in the first place! It’ll be worth it though. I tried a test fit of the wings, they seem to fit with no problems. I just wish I’d known that the top
Not a lot of blogging recently, the weather has been hampering any serious attempts to work! I have managed to get a bit done though. The windscreen frame is slowly taking final shape. I’ve got it nearly there, just a few last small ripples to get out. Work moved on to the battery tray, it
After waiting for a day with some decent weather, I got the welding finished off this weekend. Firstly I welded the bulkhead panel in place, then ground down all the excess weld from the top and sides: Then went back over the whole thing and redid a few parts that weren’t up to scratch. Once
Both panels are now in! I tacked the top panel in place and did a bit of measuring to make sure nothing had slipped. It all checked out fine, so time to get going on with the welding. End result: It looks a mess, but a good session with the grinder should sort that out.
The fitting continues – with everything more or less the way I wanted it, it was time for a final test fit of the screen – this time with the finishers: It fits well enough, so time to carry on with fitting. I got all the holes drilled for the welds: And then tack welded
After a bit more tweaking, I’ve finally got the base panel ready to fit. I had to go over the A post bits again as they weren’t quite precise, it’s a nice snug fit now. I also ground back the rest of the welding on the sides and welded some new metal in: It’s not